Not much say other then this is an amazing product. Built to withstand the ages and hours of working out to make yourself better. I highly recommend ROGUE for all workout needs and equipment, plus its made in the USA!!!!

I wanted the 6, but I only had room for the 4. This is worth the money…best rack I’ve ever owned. I mounted my large plates low and high on the rear vertical posts. I can easily work inside the cage without interference. I bought the lower stability bar and mounted the land mine in the center. It does everything I need it to, even in my limited space

Rogue's quality never ceases to amaze me. In a culture that puts almost no time or effort into quality, Rogue makes it a priority. From the material they use to the way they package the equipment when shipped, Rogue always impresses me. I wish more companies were like Rogue.

This review is solely based off of the customer support. It 2 weeks for this product to ship, which is fine, but getting it to ship was part of the many headaches. After the first week I reached out and they said oh we were waiting to confirm your shipping address even though it was on the original invoice. Another week goes by and I reach out again to find out they were then wanting to see if I wanted to upgrade my bench. They never contacted me for that but I had to cal them in order to move my shopping along. I purchased the charcoal rm-4 and after receiving it wanted to purchase the additional post and crossmembers to make it a rm-6. The rep told me exactly what to purchase and so I did. After receiving the crossmembers I noticed they were a different color! The rep never told me that I had to “request” to make it the same color as the one I just purchased, the post were the correct color but the crossmembers were then glossy and not flat like the rest of the rack. After reaching out to service they told me I would have to pay for shipping and then once they got the crossmembers it would be an additional 2 weeks out. I was also told to purchase the 4.75” bolts. I told service they don’t fit, where I had to send picture proof and then to find out you aren’t supposed to use a washer to connect the post to the 2 crossmembers. I expressed my frustration multiple times with customer service and not once did they apologize for the lack of communication, the frustration, nor sending me the wrong crossmembers when they knew the exact rack I had just purchased 2 weeks prior. For the product itself, yes it’s amazing! I love the rogue system but for customer service it is definitely due for an overhaul.

I love the rack and I'm very happy with the purchase. I've bought a lot Rogue equipment over the years. Last year we moved from the East coast to Texas and I conveyed about $10,000 worth of gym to the new owner. About half of that was Rogue equipment. In MD we had basements, in Tx we have a very small spare room for the gym... I have a few comments about the options for this package. The default for the upper rear cross member is the fat/skinny bar with the option to swap for the 43" gusset crossmember or the Rogue sign. I feel that the stock package requires the rear 43" gusset and it should be a part of the package. Most home gyms are going place this rack up against a wall. If you position the F/S bar at rear of the rack, horizontally or vertically, (or a skinny bar) the wall is going be in the way for pull ups, hanging leg raises, etc. - it doesn't make sense. I went with the F/S bar and I mounted it horizontally towards the front of the rack. I love the fat skinny bar, it's a must have. I went with the Gusset cross member for the rear, I don't see that choice as optional for the home gym. I also went with the straps, the Monster 2" J-Cup pair and the "proprietary matte black" HW upgrade. This is an expensive package, but if you can, take the upgrades even if it's a stretch, in the long run you'll be happy you did. I also added weight plate posts, also a must have. If you buy the black matte HW upgrade, be careful when you open the box, the bolts are covered with black powder (not black gun powder - black dust :-) ). I recommend opening the box of bolts outside and pour it into 5 gallon bucket with a gallon or two of water and dishwashing soap. Wash them up, rinse them off, let them dry and keep them in a towel to protect there area. You will still get black on your hands when you put it together, but it's not that bad. I went with "gun metal", it looks great but it is lighter than it looks in Rogue color palate and the photo I attached below. It's more of a gloss battleship gray. As far as the setup goes: I unboxed it, took all of the HW into the gym and laid it out, I washed the bolts. That all took me longer than bolting it together. I bolted it all together by myself in less than an hour. I put the two sides together on the ground with the bolts not quite hand tight. On one of sides I mounted top gusset side-to-side cross member. I stood it up and had my 4'10" wife hold it steady, (I needed her for less than 5 minutes). I bolted the other side panel at top, added the bottom CM, the F/S and tightened it up. Rotate around the rack as you tighten, take your time, a couple of turns, next bolt... Piece of cake... Photos below, and yes that is the SS pulley system and the reason it won out over the Rogue Slinger is that it uses hitch pins instead of bolts so it's more versatile, I can easily reposition it. Note: We have a very small home gym and this was a big purchase for us. I spent months considering my options and I've now had it for a couple of months and I wouldn't change anything. This is a great rack and a great setup for our home gym. Regards, Mark

I received and built the RM-4 rig in navy blue. The blue is gorgeous; I can push myself harder by just looking at this blue monster. The rig is incredibly sturdy, and at 225 pounds I can do pull ups without the rig moving.

I love the new rack, only thing I don’t like is all my bolts are black on the rack except for the extra support they are chrome. Wish you would send me 4 more black nuts and bolts and I will return the chrome.

Didn’t disappoint. Great rig, pretty stable. I bolted it to a platform i built instead of putting holes in my floor. I have the 108 inch one as required by my height. It’s pretty stable. I definitely wouldn’t do BMU on an unbolted one like some others stated. Dark Blue color looks great.